Safety Instructions - Bernina 555 User Manual

Safety Instructions

SAFETY INSTRUCTIONS
IMPORTANT
INFORMATION
When using an electrical appliance, basic safety
precautions should always be followed, including
the following:
Read all the instructions before using this
sewing-/embroidery computer.
When the sewing-/embroidery computer is not
in use, it should be disconnected from the
electricity supply by removing the plug from
the outlet.
DANGER!
To reduce the risk of electrical shock:
1. The sewing-/embroidery computer should
never be left unattended when plugged in.
2. Always unplug this sewing-/embroidery
computer from the electrical outlet
immediately after using and before cleaning.
3. LED Radiation – Do not view directly with
optical instruments. Class 1M LED product.
WARNING!
To reduce the risk of burns, fire, electric shock or
injury to persons:
1. Use this sewing-/embroidery computer only
for purposes as described in this manual. Use
only attachments, accessories and parts
recommended by the manufacturer.
2. Do not allow this sewing-/embroidery
computer to be used as a toy. Close attention
is necessary when this sewing-/embroidery
computer is used by or near children and
infirm persons. The sewing-/embroidery
computer is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge, unless they have
been given supervision or instruction
concerning use of the sewing-/embroidery
computer by a person responsible for their
safety. To ensure children do not play with
2
3. Never operate this sewing-/embroidery
4. Never operate the sewing-/embroidery
5. Keep fingers away from all moving parts.
6. Never insert any objects into any openings on
7. Do not use the sewing-/embroidery computer
8. Do not operate the sewing-/embroidery
9. Do not pull or push the fabric while stitching.
10. Do not use bent needles.
11. Always use the original BERNINA stitch plate.
12. To disconnect, turn power switch to «0» (off),
13. Turn power switch to «0» (off) when making
14. Always unplug the sewing-/embroidery
15. This sewing-/embroidery computer is provided
0365315.0.04_2015-05_Manual_B570QE-B555_EN
the sewing-/embroidery computer they must
be supervised.
computer if:
it has a damaged cord or plug
⦁
it is not working properly
⦁
it has been dropped or damaged
⦁
it has fallen into water
⦁
Return the sewing-/embroidery computer to
your local authorized BERNINA dealer for
examination or repair.
computer with any air openings blocked.
Keep ventilation openings of the sewing-/
embroidery computer free from the
accumulation of lint, dust and loose cloth.
Special care is required around the sewing
needle.
the sewing-/embroidery computer.
outdoors.
computer where aerosol products (sprays) or
oxygen are being used or where oxygen is
being administered.
This may deflect the needle, causing it to
break.
The wrong stitch plate can cause needle
breakage.
then remove the plug from the outlet. Do not
unplug by pulling the cord, instead grasp the
plug to pull it from the outlet.
any adjustments in the needle area, such as
changing the needle or the presser foot, etc.
computer from the electrical outlet when
carrying out cleaning or maintenance work or
any other user servicing adjustments
mentioned in this manual.
with double insulation (except USA and
Canada). Use only identical replacement
parts. See instructions for servicing of double-
insulated products.