Absolute embroidery check
Checking the motif size
Select Hoop
In the «Edit»-display any position within the motif can be selected directly using
a blunt pen.
⦁
select and edit motif
⦁
attach the respective hoop
The «Motif center» icon must be deactivated in order to utilize Absolute check.
⦁
check the motif within the hoop by using a blunt pen
⦁
select any point in the motif by using a blunt pen
►
the cursor (marking the needle position) moves to the selected area
1
►
if the icon «Virtual positioning» 1 is activated (yellow-framed), the hoop is
moved to position the needle over the selected area
If the thread breaks, the blunt pen can also be placed on the area of
the Display where the thread broke. The hoop moves to that area.
⦁
touch «Select hoop»-icon
⦁
touch «Check»-icon
►
the hoop size is read = the hoop moves
The «Check motif size»-function reads the attached hoop size and stitching
area:
⦁
select the four corners using the arrow icons
⦁
touch «Motif center»-icon
►
the needle moves to the center position of the motif
⦁
touch «Back»-icon
►
the Display closes
►
an error message appears when no embroidery hoop has been attached or
the attached embroidery hoop is too small
⦁
select «Select hoop»-icon
For best embroidery results always use the smallest hoop possible for the
motif.
⦁
select desired hoop
►
the selected hoop is highlighted in white
⦁
touch «Back»-icon
►
the Display is closed
►
the motif appears in the selected hoop
0365315.0.04_2015-05_Manual_B570QE-B555_EN
Embroidery motifs
Embroidery motifs
145