Button Sew-On Program; Preparation; Sewing On Buttons; Sewing On Buttons With Darning Foot No - Bernina 555 User Manual

Button sew-on program

Button sew-on program
92
⦁ touch «Buttonhole«-button
⦁ touch «Button sew-on program»-icon
Darning foot No. 9 (optional accessory)
Button sew-on foot No. 18 (optional accessory)
Button sew-on program No. 60
For buttons with 2 and 4 holes.

Preparation

⦁
lower the feed dog

Sewing on Buttons

Buttons sewn on for decorative purposes only are stitched without a thread
shank. «Shank length» = distance between button and fabric; can be adjusted
with Button sew-on foot No. 18
Sewing on buttons with darning foot No. 9 (optional accessory)
⦁ select button sew-on program
⦁ check distances between holes with the handwheel
⦁ adjust stitch width if necessary
⦁ hold the threads when starting to sew
⦁ sew the first securing stitches into the left hole
⦁ sew program
►
sewing computer stops automatically when program is completed and is
ready for the next button
Beginning and ending threads
The threads are secured and can be trimmed.
For a increased stability
⦁
pull on both bobbin threads until the ends of the upper threads are visible
on the wrong side
⦁
pull the threads out and knot the ends additionally
⦁
trim the threads
Sewing on buttons with foot No. 18 (optional accessory)
⦁ set the shank length with the screw on the foot
⦁ select button sewing-on program and continue as with foot No. 9 (optional
accessory)

Sewing on a 4-Hole button

⦁ sew the front holes first
⦁ carefully move the button forward
⦁ sew the back holes with the same program
For a increased stability the button sew-on program can be sewn
twice.
0365315.0.04_2015-05_Manual_B570QE-B555_EN