Bernina 555 User Manual page 162

General Repair
Explanation
̶ Lower feed dog
̶ Incorrect needle for the stitch plate
selected
̶ Needle is not in the highest position
̶ Upper thread used up
̶ Main motor is not running
̶ Needle position doesn't correspond to
center of hoop
̶ Attaching the Module
̶ No embroidery hoop attached
̶ Embroidery hoop attached
Messages
⦁
⦁
⦁
⦁
⦁
⦁
⦁
⦁
⦁
⦁
0365315.0.04_2015-05_Manual_B570QE-B555_EN
press the «Feed dog»-button. The feed dog is lowered
check settings in securing program
turn handwheel
attach new upper thread spool and thread
check hook system. Remove any thread lint from the hook
area/bobbin case
adjust according to User Instructions page 49
position the module correctly to the sewing computer. Plug
the cable in the outlet provided
an animation shows that emboidery software is loaded
attach embroidery hoop
remove embroidery hoop
Troubleshooting
161