Aastra 142d User Manual page 77

Hide thumbs Also See for 142d:
Table of Contents

Advertisement

Features and Menus
Alarm active: This setting activates (") or deactivates the alarm. The
symbol appearing on the display indicates an alarm is activated.
Set: When the 24 hour time format is set, enter the alarm time between
00:00 and 23:59. The time can be selected between 00:00 and 11:59
for the 12 hour format. Enter "am" with key 2 (a on display), "pm"
with key 7 (p on display). You can configure the signalling melody as
described below. The alarm signalling lasts ca. 1 minute and can be
switched off by pressing any number key. After each signalling of an
alarm, you must activate any subsequent alarm once again.
Date/Time: If the date and/or time is transmitted by the system, this menu
entry cannot be changed. If the system where the mobile unit is
currently checked into does not transmit date and time you can
enter the current date and the current time. For 12-hour format:
After entering the time use the number 2 to switch to "am" or
number 7 to "pm". You can set the date and time display format in
the "Telephone Option" menu (see page 75).
Melody: Select a melody for signalling the alarm. To do so, press one of the
number keys or select the melody with the arrow keys. You can also
change this melody under "Ringer Settings> Melody" (see the
following section).
Ringer Settings: This menu is for setting ringer volume and signalling for your
telephone.
Melody: Different call types can be signalled using different melodies.
There are 60 different melodies available respectively. Select the call
type. Select the call type. Enter a number (1 ... 9 or for two-digit
entry, 10 ... 60, pressing the numbers quickly one after another) or
change the number displayed with the arrow keys.
Type: This setting determines how selected melodies are signalled.
Repeat: The melody is played (repeatedly) as long as the call is
Play once: The melody selected is played just once when there is a
Device: You can select the combination of signal generators with which the
call will be signalled.
Buzzer: Activates or deactivates the acoustic ringer tone. If you
signalled.
call.
deactivate the signal generator then this is shown in the
display with the
symbol.
71

Advertisement

Table of Contents
loading

Table of Contents