Creating New Subscription - Aastra 142d User Manual

Installation
Note:
You may select an existing subscription entry and change its settings in the
Subscriptions menu. Please refer to the Managing existing subscription starting
on page 72 section for information.

Creating New Subscription

The subscription of the mobile unit to a communications system is necessary for
the mobile unit to check in to the communications system. A further requirement
is that the communications system can establish a radio connection to the mobile
unit (PP = Portable Part) via one or more connected radio stations (RFP = Radio
Fixed Part).
When you wish to subscribe the mobile unit, you must configure a new DECT con-
figuration entry in the communications system. The IPEI (International Portable
Equipment Identity) of the mobile unit is required for this configuration entry. The
IPEI is displayed on the mobile unit at the beginning of subscription (see the fol-
lowing "Start subscription" section).
Start subscription
You have selected the New menu entry in the Subscriptions menu (please refer to
the sections No subscription on page 15 and Mobile unit is already checked in to
the communications system on page 16).
Now conduct the subscription with the following steps:
The mobile unit IPEI appears. Read the IPEI and enter it into the
communications system Configurator. Enter the desired authenti-
cation code (AC = Authentication Code) into the Configurator as
well.
OK
Press softkey to continue.
Z
Enter PARK: now enter the PARK of the communications system.
The PARK (Portable Access Right Key) identifies the communica-
tions system. You can view this number in the communications
system Configurator.
If there are no other communications systems within radio range
and you have activated simplified registration on the communica-
tions system, you can continue without entering a PARK.
OK
Press softkey to confirm and continue.
17