Inserting Mem Card - Aastra 142d User Manual

Installation

Inserting MEM Card

Safety precaution!
The MEM card must be handled with a great deal of care. The contacts must be
free of dust, moisture, grease, etc. Do not store the MEM card in warm areas (e.g.
direct sunlight). Do not bend the MEM card; the contacts can be broken.
The MEM card is inserted into the battery compartment below the battery.
1. Using your finger, first remove the small MEM card from the larger frame.
2. Open the battery compartment (see page 10) and remove the batteries (if
these have already been inserted).
3. Slide the MEM card cover in the battery compartment in the arrow direction
(OPEN). Gently pivot the cover upwards.
Note: Never touch the shiny gold contacts now visible! Static discharge
can cause the device to become defective.
4. Slide the MEM card (with the contacts facing downwards) under the half-moon
holders (a) in the MEM card compartment. Ensure that the bevelled edge of the
MEM card is to the bottom left while doing so.
5. Press the MEM card down until it audibly locks into place.
13