Removing Mem Card; Subscribing Mobile Unit - Aastra 142d User Manual

Installation
b
6. Close the MEM card compartment with the cover. Slide the cover notches into
the case until the cover is completely covering the MEM card.
7. Insert the batteries and close the battery compartment (see page 10).

Removing MEM Card

It is only necessary to remove the MEM card if you pass the mobile unit on to
someone or if you need the MEM card for a new mobile unit.
After having removed the batteries (see page 10):
1. Slide the MEM card cover in the battery compartment in the arrow direction
(OPEN). Gently pivot the cover upwards.
2. Use a pointed object to push onto the release (b), see diagram on page 14.
3. Take the MEM card out.

Subscribing Mobile Unit

Your mobile unit can be operated on a maximum of 10 different communications
systems. To do so, it has to be subscribed to each system, i.e. subscribed and
checked in.
The subscription procedure is usually done when commissioning the device. This
is usually done by your system administrator for you when operated on the
OpenCom 1000 communications system. Subscribing is done via the following
steps:
1. Switch on the mobile unit. To do so, press the
When commissioning for the first time, the Language menu appears. Use the
F
arrow keys to select the desired display language. Confirm with the
or with the OK softkey.
14
a
2
1
C
key.
D
key