Switching Off; Further Settings - Miele KWT 1601 Vi Operating And Installation Instructions

Switching off

^ Press the rocker switch.
The cooling system and the lighting are
now switched off.

Further settings

Further settings can be selected in the
settings mode.
In settings mode, you can select certain
appliance functions via the control
panel and adjust the settings. The
settings for the different functions are
described in more detail in the relevant
section of these instructions.
Overview of functions that can be
selected in the settings mode:
Function
To enter or leave
settings mode
To select the
temperature unit (see "The
ideal temperature and
humidity level")
No function selected
To switch the sensor tone
on/off (see "Switching on
and off")
To set the humidity level
(see "The ideal temperature
and humidity level")
To switch the sensor tone on/off
The tone which sounds each time a
sensor is touched can be deactivated.
^ Touch the access sensor so that it is
highlighted in yellow.
^ Touch the sensor for one of the zones
(it does not matter which) so that it is
highlighted in yellow.
^ Take note of the position of the X
sensor (but do not touch it!).
Symbol
^ Touch the access sensor until it is
display
highlighted in white and all of the
ed
other sensors are no longer lit up.
;
^ Place your finger in the position of the
X sensor, and leave it there.
†
^ At the same time, briefly touch the
access sensor (without letting go of
the X sensor).
;
=
Switching on and off
§
17