Miele KWT 1601 Vi Operating And Installation Instructions page 34

Wine conditioning unit
Table of Contents

Advertisement

Problem solving guide
^ Pull the defective halogen lamp out.
^ Fit the new lamp into the holder.
The following type of halogen lamp is
required:
5 W/12 V/ G 4 cap.
^ Replace the lamp cover, turning it
clockwise as far as it will go.
^ Reconnect the appliance to the
electricity supply and switch it on.
. . . a white deposit builds up on the
corks of the bottles.
The corks are oxidising through contact
with the air.
^ Wipe the deposit off with a dry cloth.
The deposit can have a detrimental
effect on the quality of the wine.
. . . mildew has begun to form on the
wine bottle labels.
Mildew can begin to form on the labels,
depending on the type of adhesive
used.
^ Wash the wine bottles and remove
any adhesive residue.
34
If you still cannot remedy the fault,
having followed these suggestions,
please contact Miele.
To prevent unnecessary loss of
temperature, it is advisable not to
open the door while waiting for the
appliance to be serviced.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kwt 1602 viKwt 1611 viKwt 1612 vi

Table of Contents