Preparing The Furniture Fronts - Miele KWT 1601 Vi Operating And Installation Instructions

Installation

Preparing the furniture fronts

^ Open the appliance door as far as it
will go.
^ Unscrew the installation aids l and
angle trim m from the door.
^ Put the angle trim m and screws in a
safe place - they will be required
later.
^ Remove the cover from the light
contact switch.
^ Close the appliance door.
56
^ Measure the gap X between the
adjusting bar and the upper edge of
the adjacent furniture front.
^ Remove the two nuts from the
appliance door, and place them in a
safe place - they will be required
later.
^ Place the furniture front on a firm
surface, with the external side facing
downwards (place on a blanket or
similar to avoid it becoming
scratched).