Miele KWT 1601 Vi Operating And Installation Instructions page 16

Wine conditioning unit
Table of Contents

Advertisement

Switching on and off
The zones are set at the factory for the
following types of storage:
– Lower zone:
for storing wine for a longer period of
time (left-hand symbol)
– Middle zone:
for storing white wine (middle
symbol)
– Upper zone:
for storing red wine (right-hand
symbol)
To switch the display lighting on or off,
^ touch the sensor for the display
lighting.
To select settings for your appliance
(e.g. to set the temperature, etc.),
^ touch the sensor for the particular
zone of the appliance where you
would like to select the settings.
16
A sensor that has been selected is
highlighted in yellow. You can now
– set the temperature, or
– set the humidity level for the zone
you have selected.
Please refer to the relevant section for
more information.
To deselect a zone,
^ touch the sensor of the selected zone
again so that it is highlighted in white,
or select a different sensor.
To leave settings mode,
^ touch the access sensor so that it is
highlighted in white.
Your last selected settings will now be
saved to memory.
If you do not touch the access sensor,
the electronics for accessing the
settings will switch off after a period.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kwt 1602 viKwt 1611 viKwt 1612 vi

Table of Contents