Miele KWT 1601 Vi Operating And Installation Instructions page 33

. . . the alarm sounds and the "Alarm
off" sensor lights up or is flashing.
^ The door is open, or
^ The temperature in one of the zones
has risen significantly because
– too much warm air from the room has
entered the appliance,
– the vents are blocked or dusty,
– several bottles of wine have been
placed into the appliance at once, or
– there has been a power cut.
The alarm will stop and the "Alarm off"
sensor in the display will go out again
as soon as the temperature has
dropped down to the correct level
again.
. . . a fault message with "_F" appears
in the temperature display.
There is a fault. Call Miele.
. . . the display lighting is not
working.
Call Miele.
Problem solving guide
. . . the interior lighting is not
working.
To avoid overheating, the lighting
switches itself off automatically after
approx. 5 minutes if the door is left
open. It will come on again after it has
cooled down sufficiently.
If it also does not come on when the
door is opened briefly, then the lighting
is defective.
^ Switch the appliance off by pressing
the On/Off rocker switch
^ Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
^ Turn the lamp cover anti-clockwise to
remove it.
Do not touch halogen lamps with
your bare fingers.
Use a soft cloth when changing a
halogen lamp.
33