Installation with a partition wall using
the side-by-side installation kit
The partition wall must be at least
16 mm thick.
If the partition wall between the two
appliances is between 16 mm and
160 mm thick, each appliance must be
built into its own niche using the
assembly parts supplied. The
side-by-side installation kit is also
required.
Installation with a partition wall
without the side-by-side installation
kit
If the partition wall between the two
appliances is more than 160 mm thick,
each appliance must be built into its
own niche using the assembly parts
supplied (without using the
side-by-side installation kit).
Installation advice
To limit the opening angle of
the door
The door hinges are set at the factory to
enable the door to be opened wide.
However, if the appliance door hits an
adjacent wall when opened, for
example, the opening angle can be
limited to 90°.
^ Open the appliance door.
^ Insert the pin into the hinge from
above, as shown.
The door opening angle is now limited
to 90°.
41