Toshiba RAV-SM564ATJP-E Service Manual page 105

No. Part name
Discharge
2
port cabinet
Side cabinet
3
SVM-13072.indb 105 SVM-13072.indb 105
Procedure
1. Detachment
1) Carry out work of 1 of
2) Remove screws for the discharge port cabinet
and the partition plate.
(ST1T Ø4 × 8, 3 pcs.)
3) Remove screws for the discharge port cabinet
and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
4) Remove screws of the discharge port cabinet
and the motor base. (ST1T Ø4 × 8, 2 pcs.)
5) Remove screws of the discharge port cabinet
and the heat exchanger.
(ST1T Ø4 × 8, 1 pc.)
6) Remove screws of the discharge port cabinet
and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
1. Detachment
1
1) Carry out work of 1 of
2) Remove screws which fix the inverter
assembly and the side cabinet.
(ST1T Ø4 × 8, 2 pcs.)
3) Remove screws of the side cabinet and the
valve fixing plate. (ST1T Ø4 × 8, 2 pcs.)
4 Remove screws of the side cabinet and the
pipe panel (Rear).
(Hexagonal screw Ø4 × 10, 2 pcs.)
5) Remove screws of the side cabinet and the
bottom plate. (Hexagonal screw Ø4 × 10, 1 pc.)
6) Remove screws of the side cabinet and
the heat exchanger. (Hexagonal screw
Ø4 × 10, 3 pcs.)
7) Slide the side cabinet upward and then remove
it.
(Hook of inverter)
Heat exchanger
.
1
.
Valve fixing plate
– 105 –
FILE NO. SVM-13072
Remarks
Discharge port cabinet
Motor base Partition plate
Fin guard
Inverter assembly
Side cabinet
Panel piping
(Rear)
11/01/13 1:53 PM 11/01/13 1:53 PM