Installation; Installation Safety - JinkoSolar JKMxxxP-72 Series User Manual


 Only PV modules with the same cell size should be connected in series.
 During all transportation situations, please make sure no huge shock for the
vehicle or the modules, as this may damage the module or lead the cell to be
crack.
 During all transportation situation, never let the module fall down from the vehicle,
house or hands. This will break the cells of the modules.
 Do not clean the glass with chemicals.
 Do not disconnect any of the modules when it is under load.

2. Installation

2.1 Installation safety

 Always wear protective head gear, insulating gloves and safety shoes (with
rubber soles).
 Keep the PV module packed in the carton until installation.
 Do not touch the PV module unnecessarily during installation. The glass surface
and the frame may be hot. There is a risk of burns and electric shock.
 Do not work in rain, snow or windy conditions.
 Due to the risk of electrical shock, do not perform any work if the terminals of the
PV module are wet.
 Use insulated tools and do not use wet tools.
 When installing PV modules, do not drop any objects (e.g., PV modules or tools).
 Make sure flammable gasses are not generated or present near the installation
site.
 Insert interconnect connectors fully and correctly. Check all connections.
- 5 -
Rev. C