Installation; Installation Safety - JinkoSolar JKM350PP-72-DV Installation Manual

conductor current ratings, fuse sizes, and size of controls connected to the PV
output.
 Once the PV module has been shipped to the installation site, all of the parts
should be unpacked properly with care.
 Do not stand or step on the PV module like below pictures show. This is
prohibited and there is a risk of damage to the module and cause injury for you.
 Only PV modules with the same cell size should be connected in series.
 During transporting modules, please attempt to minimize shock or vibration to the
module, as this may damage the module or lead to cell micro cracks.
 During all transportation situations, never drop the module from a vehicle, house
or hands. This will damage module.
 Do not clean the glass with chemicals. Only use tap water. Make sure the module
surface temperature is cool to the touch. Cleaning modules with cool water when
module surface temp is high may result in glass breakage.
 Do not disconnect any of the modules when under load.
 When looking at PV modules with anti-reflection (AR) coating technology, it will
be normal to see some cells with a slight color difference at different angles.

2. Installation

2.1 Installation safety

 Always wear protective head gear, insulating gloves and safety shoes (with
rubber soles).
 Keep the PV module packed in the carton until installation.
 Do not touch the PV module unnecessarily during installation. The glass surface
and the frame may be hot. There is a risk of burns and electric shock.
-4-