Processors, Heatsinks, And Processor Power Modules - HP ProLiant BL20p Generation 2 Maintenance And Service Manual

Processors, Heatsinks, and Processor Power Modules

To remove a processor:
1. Power down the server blade and remove it from the server blade enclosure. Refer to
"Server Blad e Preparation" in this chapter.
2. Remove the access panel. Refer to "A ccess Panel" in this chapter.
3. Push down on the slate-blue locking levers on both sides of the processor assembly, and
then pull them up (1).
4. Remove the heatsink (2).
Figure 2-7: Unlatching the processor locking levers
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
HP CONFIDENTIAL Codename: Reppin Part Number: 316078-005 Last Saved On: 2/23/04 10:31 AM
CAUTION: The heatsink is not reusable and must be discarded if removed from the
processor after application.
Removal and Replacement Procedures
2-11