Table of Contents
Advertisement
Removal and Replacement Procedures
Hard Drive Blanks
To remove a hard drive blank:
1. Press the release buttons simultaneously (1).
2. Pull the blank out of the drive bay (2).
Figure 2-4: Removing a hard drive blank
To replace the hard drive blank, slide the blank into the bay until it locks into place. The hard
drive blank is keyed to fit only one way.
2-8
HP CONFIDENTIAL Codename: Reppin Part Number: 316078-005 Last Saved On: 2/23/04 10:31 AM
CAUTION: Always populate hard drive bays with either a hot-plug SCSI hard drive or hard
drive blank. Operating the server blade without a hot-plug SCSI hard drive or hard drive blank
results in improper airflow and improper cooling that can lead to thermal damage.
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
Advertisement
Table of Contents
