HP ProLiant BL20p Generation 2 Maintenance And Service Manual page 34

8. Remove the plastic fan baffle (1), and disconnect the SCSI backplane cable from the
system board (2).
NOTE: The fan baffle is most easily removed at a 45˚ angle. Depending on the server model, the fan
baffle may be attached to the system board with a small plastic clip.
Figure 2-22: Disconnecting the SCSI backplane cable
Reverse steps 1 through 8 to replace the SCSI backplane.
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
HP CONFIDENTIAL Codename: Reppin Part Number: 316078-005 Last Saved On: 2/23/04 10:31 AM
CAUTION: For local I/O cable server models, be sure the LED board cable is not disengaged
when removing the fan baffle. When reinstalling the fan baffle, be sure cable is fully seated.
Removal and Replacement Procedures
2-23