Maintenance; Firmware Upgrade; Programming (Custom); Accessories - KMC Controls FlexStat series Operation Manual

Maintenance

Remove dust as necessary from the holes in the top
and bottom. Clean the display with a soft, damp
cloth and mild soap.
To maintain maximum sensitivity of an optional
built-in motion sensor, occasionally wipe dust or dirt
off the lens—but do not use any fluid on the sensor.

Firmware Upgrade

The existing version of firmware can be viewed from
the About the FlexStat screen. (See About the Flex-
Stat on page 6).
Firmware in the FlexStat can be upgraded using a PC
and an HTO-1103 Firmware Flash Upgrade Kit avail-
able from KMC Controls. (For full upgrade instruc-
tions, see the HTO-1103 Installation Guide.) (The old
KMD-5699 part number was changed to HTO-1103
in Aug. 2010 to better reflect its "tool" identity.)

Programming (Custom)

The FlexStat has a library of built-in applications and
options that are configured through the FlexStat's
display. Beyond these standard configurations, cus-
tom changes can be added to a FlexStat using KMC's
BACstage (ver. 2.4.0.26 or later) or TotalControl (ver.
2.0.5 or later). See the FlexStat Application Guide
for more information.
NOTE: Customized programs are the responsibility
of the user. KMC Controls does not provide
support for such programs.
FlexStat

Accessories

Mounting
HMO-10000
HMO-10000W
SP-001
Network Communications and Firmware
HTO-1103
KMD-5567
KMD-5575
KMD-5576
KMD-5624
Power (120 to 24 VAC Transformers)
XEE-6111-040
XEE-6112-040
29
Horizontal or 4
x 4 handy box
wall mounting
plate for BAC-
10xxx/12xxxx
models only,
light almond
(shown)
HMO-10000 in
white
Screwdriver
(KMC branded)
with flat blade
(for terminals)
and hex end (for
cover screws)
FlexStat firmware
flash upgrade kit
(formerly KMD-
5699)
Network surge
suppressor
Network repeat-
er/isolator
EIA-485 to USB
Communicator
PC data port
(EIA-485) cable
(FlexStat to USB
Communica-
tor)—included
with the KMD-
5576 (buy for
third-party EIA-
232 interfaces)
40 VA, single-hub
40 VA, dual-hub
Operation Guide, Rev. M