Network Functions (Supplementary Services); Call Forwarding; Unconditional; No Reply - Swisscom Aton CL111 User Manual

Network functions (supplementary services)

To activate certain network functions, you have to send special codes to the network.
Often these codes contain special characters such as
the so-called flash signal is required. You can enter this by pressing key
Contact your network operator for details and the appropriate codes to activate these
services.
Procedure:
1. Press the softkey under MENU. Press
to confirm.
2. Scroll to the relevant submenu and make the relevant settings:

Call forwarding

Call forwarding allows callers to reach you even if you are not near your own telephone.
Choose the relevant type of call forwarding (unconditional, no reply, busy) in the submenu
SWITCH ON SWITCH OFF
or
calls are to be forwarded).

Unconditional

Incoming calls are forwarded immediately.

No reply

Incoming calls are forwarded after a delay (fixed time or number of rings).

Busy

Calls are forwarded if the line is busy.
Once you have defined the call forwarding option, enter the forwarding number
(i.e. the number to which calls are to be forwarded).
You can: • check the call forwarding status
• edit or delete the forwarding number (forwarding numbers are not
saved in the telephone)
• deactivate call forwarding.
to scroll to
and enter the forwarding number (i.e. the number to which
39
or . In some cases,
R
NET FUNCTIONS
and press OK
.