Setting Up The Handset; Inserting The Rechargeable Batteries - Swisscom Aton CL111 User Manual

Setting up the telephone

Setting up the handset

Your handset will be ready for operation (for making or accepting calls) only once the
batteries have been fully charged for the first time.

Inserting the rechargeable batteries

The bottom part of the handset contains a battery compartment for housing two type
AAA batteries (microcells).
Inserting the two rechargeable batteries (note the polarity!):
Insert the batteries in the battery compartment. Make sure the polarity is correct. Insert
the batteries so that the flat end (negative polarity) of the battery is pressing against the
spring. The handset will not function if the batteries are incorrectly inserted. This may
result in damage. Replace the compartment cover by placing it approximately 3 mm off-
set and slide it upwards until it clicks into place.
Removing the belt clip:
Press on the top of the clip and
shift it upwards to remove it.
Removing the battery
compartment cover:
Slide the battery compart-
ment cover downwards
(approx.3 mm) and lift.
12