Language Choice/Installation Assistant - Swisscom Aton CL111 User Manual

Setting up the telephone
Note You can replace the handset in the base station after every call. Charging is
electronically controlled to ensure optimal charging of batteries in different
charge states. Avoid removing the batteries from the handset for no good
reason, since this affects the optimum charging cycle.
Because your telephone is fitted with a low-radiation mechanism, the antenna
automatically switches off in standby mode and cannot therefore emit any
radiation. Your telephone is delivered with this function switched on.
You can telephone for up to 12 hours with fully charged batteries.
The handset has a standby time of up to 120 hours.
If the battery charge status has reached its lower limit, the battery symbol (
flashes in the display and a warning signal is heard. You have 10 minutes of
talk time left.

Language choice/Installation assistant

The language choice appears. Press
to confirm.
An installation assistant guides you then step by step through the setup procedure for
your telephone.
Enter time and date according to the displayed instructions.
Note The installation assistant will re-appear following a reset of the telephone
(reset to default settings).
to scroll to the desired language and press OK
14
)