The Stand; Inserting The Stand; Removing The Stand - Swisscom Aton CL111 User Manual

Setting up the telephone

The stand

Inserting the stand

1. Lay the base station down on the table
(front side down).
2. Insert the stand in the grooves
base station and press it on lightly.
3. Make sure that the lower support
tabs click into the slots provided.
There is a definite click when the stand
is properly seated.

Removing the stand

1. Lay the base station down on the table (front side down).
2. Fix the base station with one hand.
3. With the other hand press the two tabs
the stand out.
of the
1
right and left simultaneously and pull
10
1
2
1
2
2
1
2