Table of Contents
Advertisement
TT4000 Series
3
Installation
3.1
Unpacking the label printer
Lift the label printer out of the box via the straps.
⇒
Check label printer for damage that may have occurred during transport.
⇒
Check delivery for completeness.
⇒
Pack contents (basic version)
Label printer
•
Empty cardboard core, mounted on ribbon take-up hub
•
Tear-off plate
•
Power cable
•
Documentation and driver on CD
•
Retain the original packaging for subsequent transport.
3.2
Setting up the label printer
CAUTION!
The device and the print media can be damaged by moisture and water.
The label printer may only be set up in a dry place protected from sprayed
water.
Figure 1: Removing the transportation safeguards
Operating Instruction
Set up printer on a level surface.
⇒
Open cover (1) of the label printer.
⇒
Remove foam transportation safeguards near
⇒
the print head (2).
8
Advertisement
Table of Contents
