Table of Contents
Advertisement
TT4000 Series
2
Safety and the environment
Read these operating instructions carefully before using the label printer for the first time.
The operating instructions describe all of the functions of the label printer during operation.
The available functions depend on the version used for a specific job.
2.1
Intended use
The label printer is a state-of-the-art device that complies with the recognized safety-
•
related rules and regulations. Despite this, a danger to life and limb of the user or third
parties could arise and the label printer or other property could be damaged while
operating the device.
The label printer may only be used while in proper working order and for the intended
•
purpose. Users must be safe, aware of potential dangers and must comply with the
operating instructions! Faults, in particular those which affect safety, must be remedied
immediately.
The label printer is solely intended to print suitable media that have been approved by
•
the manufacturer. Any other or additional use is not intended. The manufacturer/supplier
is not liable for damage resulting from misuse. Any misuse is at your own risk.
Intended use includes heeding the operating instructions, including the maintenance
•
recommendations/regulations specified by the manufacturer.
2.2
Safety notes
The label printer is designed for power supply systems from 100 V AC to 240 V AC.
•
Connect the label printer only to electrical outlets with an earthed contact.
Couple the label printer to devices using extra low voltage only.
•
Before making or undoing connections, switch off all devices involved (computer, printer,
•
accessories etc.).
Operate the label printer in a dry environment only and do not get it wet (sprayed water,
•
mist etc.).
If the label printer is operated with the cover open, ensure that clothing, hair, jewellery
•
and similar personal items do not contact the exposed rotating parts.
The print mechanism can become hot during printing. Do not touch it during operation
•
and allow it to cool down before changing the media or before removal or adjustment.
Carry out only the actions described in these operating instructions. Other tasks may only
•
be performed by trained personnel or service technicians.
DANGER!
Risk of death via mains voltage!
Do not open the housing of the label printer.
Operating Instruction
6
Advertisement
Table of Contents
