TT4000 Series
1
Notes on the documentation
1.1
Structure of the documentation and navigation
The documentation for the thermal transfer printer TT4000 is split into the following sections:
Operating Instructions
•
This is included in printed form and is directed toward persons who operate the label
printer and perform basic maintenance and service work on the printer.
Configuration Instructions
•
These are available on request at HellermannTyton and are directed toward persons
who set up, configure and perform more extensive maintenance and service work on the
label printer.
Service Instructions
•
These are available on request at HellermannTyton and are directed toward trained
service personnel who maintain and repair the label printer.
1.2
Warnings, notes and other identifying markings
1.2.1
Warnings
Warnings are presented with three signal words for the different levels of danger.
The signal word DANGER identifies an extraordinarily great and immediate danger that
could lead to serious injury or even death.
The signal word WARNING identifies a possible danger would could lead to serious bodily
injury or even death if sufficient precautions are not taken.
The signal word CAUTION indicates a potentially dangerous situation that could lead to
moderate or light bodily injury or damage to property.
Warnings are always identified with a warning symbol (yellow triangle) and the signal word
and specify the source of the danger, possible consequences and measures for avoiding the
danger.
Here's an example:
DANGER!
Risk of death via electric shock!
Before opening the housing cover, disconnect the device from the mains supply and
wait a few minutes until the power supply unit has discharged.
Operating Instruction
4