Operations Overview Unpacking and Inspection This printer has been specially packaged to withstand damage during shipping. Please carefully inspect the packaging and printer upon receiving the bar code printer. Please retain the packaging materials in case you need to reship the printer. Unpacking the printer, the following items are included in the carton.
Lock down, push up face plate, and close lid. Setup Setting Up the Printer Connecting to the Power Supply The printer is equipped with a wide area network unit. The device can be operated with a supply voltage of 230 V~/50 Hz or 115 V~/60 Hz without adjustment. Check that the device is switched off.
Installing the printer drivers Plug your USB stick into a separate port on your computer; this stick contains your printer driver SELECT “Open folder to view files”...
Page 14
ACCESS THE FILES ON THE USB STICK DOUBLE CLICK ON PrnInst TO OPEN THE DRIVER INSTALLER CLICK ON NEXT...
Page 15
Select TTM430 Next Choose a USB Port that is NOT used by any other device. This must only be for the printer.
Page 16
FINISH Congratulations, you have successfully set up your TTM430!