Table of Contents
Advertisement
TT4000 Series
6.3
Loading fanfold labels
Figure 10 Feed path of paper with fanfold labels
1.
Loosen knurled screw (1) and slide guide (2) outward completely and swivel it
downward past the roll retainer (3).
2.
Position label stack (4) behind the printer. Ensure that the labels on the strip are
visible from above.
3.
Guide label strip to print unit via the roll retainer (3). See Figure 10.
4.
Push guide (2) against the label strip, swivel it upward against the roll retainer and
tighten knurled screw (1).
5.
Insert label strip into print head (see 6.1.2 on Page 17).
6.
Set label sensor (see 6.1.3 on page 17).
7.
Set label sensor (see 6.1.6 on page 20).
8.
Turn lever (5) clockwise to lock the print head.
Operating Instruction
22
Advertisement
Table of Contents
