ICP DAS USA GW-7238D User Manual page 25

About
GW-7238D Status
[1] Interface
[2] Error
[3] Date Created
[4] Firmware Version: Display firmware version.
Configuration Setting
The Modbus configuration contains the parameters used to control
the behavior of the Modbus serial interface. The parameters are described
as Table 3-1.
All modules on the network must use the same baud/parity/data/stop
bits configuration.
Table 3-1 Modbus Configuration Parameters
Item
The ID of the module on the Modbus
Net ID network. All modules on the network must
have a unique address.
Baud Rate The network baud rate.
Parity The serial communication parity.
The number of data bits used in the serial
Data Bits
communication.
The number of stop bits used in the serial
Stop Bits
communication.
IP Address IP Setting.
Net Mask Net Mask Setting.
Gateway Gateway Setting.
GW-7238D J1939 to MBTCP Server / MBRTU Slave Gateway User's Manual (Ver.1.1, May. 2013) ---
: Display the GW-7238D utility version.
: Display communication interface.
: Display error status.
: Display firmware creation date.
Description
25
Range
1~99
9600~115200
NONE / ODD
/ EVEN
Fixed at 8
1 / 2
192.168.255.1
(Default)
255.255.0.0
(Default)
192.168.0.1
(Default)