ICP DAS USA GW-7238D User Manual page 15

1939 to modbus tcp server / rtu slave gateway

Hide thumbs Also See for GW-7238D:

Table of Contents

Figure 2-13: Firmware downloads connection

Users can download the firmware into the GW-7238D as following

steps:

1. Power-off the GW-7238D.

2. Set the dip-switch to the "Init" (Initial) position.

3. Install the download cable between COM1 of the GW-7238D &

COM1 of PC.

4. Power-on the GW-7238D & Run 7188xw.EXE.

5. Then press F4 button to load firmware automatically.

PS: the firmware files are "GW7238D.EXE " and

"autoexec.bat".

These two files and the 7188xw.exe must be in same directory.

6. Set the dip-switch to the "Normal" position.

7. Re-boot the GW-7238D

8. Pressing Alt & X at the same time will quit the 7188xw.EXE

GW-7238D J1939 to MBTCP Server / MBRTU Slave Gateway User's Manual (Ver.1.1, May. 2013) ---

Figure 2-12: CA-0910 Cable

Table of Contents