Moxa Technologies EDS-305-M12 Hardware Installation Manual
Moxa Technologies EDS-305-M12 Hardware Installation Manual

Moxa Technologies EDS-305-M12 Hardware Installation Manual

Etherdevice switch

Advertisement

Quick Links

MOXA EtherDevice Switch
EDS-305-M12
Hardware Installation Guide
First Edition, July 2007
Moxa Networking Co., Ltd.
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
www.moxa.com
support@moxa.com
(Worldwide)
support@usa.moxa.com (The Americas)
P/N:1802003050010

Advertisement

Table of Contents
loading

Summary of Contents for Moxa Technologies EDS-305-M12

  • Page 1 MOXA EtherDevice Switch EDS-305-M12 Hardware Installation Guide First Edition, July 2007 Moxa Networking Co., Ltd. Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 www.moxa.com support@moxa.com (Worldwide) support@usa.moxa.com (The Americas) P/N:1802003050010...
  • Page 2: Package Checklist

    (Class 1 Division 2/Zone 2), and comply with CE, FCC, UL, DNC, and GL Standards. Package Checklist Your EDS-305-M12 is shipped with the following items. If any of these items is missing or damaged, please contact your customer service representative for assistance.
  • Page 3: Mounting Dimensions (Unit = Mm)

    4. Power input (5-pin shielded M12 socket with A coding) 5. Power input (PWR) LED 6. Model name 7. Holes for attaching the EDS-305-M12 to a wall with screws (there are 3 holes: bottom left, bottom right, and top middle) 8. Grounding screws...
  • Page 4: Wiring Requirements

    It is strongly advised that you label wiring to all devices in the system when necessary. Grounding the EDS-305-M12 Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting devices.
  • Page 5: 10/100Baset(X) Ethernet Port Connection

    All EDS-305-M12 models have 5 10/100BaseT(X) Ethernet ports (4-pin shielded M12 socket with D coding). The 10/100TX ports located on the EDS-305-M12’s front panel are used to connect to Ethernet-enabled devices. Most users configure these ports for Auto MDI/MDI-X mode, in which case the port’s pinouts are adjusted automatically depending on the type of Ethernet...
  • Page 6 Cable Wiring Dual Speed Functionality & Switching The EDS-305-M12’s 10/100 Mbps switched M12 ports auto negotiate with the connected device to use the fastest data transmission rate supported by both devices. All of MOXA’s EtherDevice switches are plug-and-play devices, so that software configuration is not required.
  • Page 7: Switching And Address Learning

    Switching and Address Learning The EDS-305-M12 has an address table that can hold up to 1000 node addresses, which makes it suitable for use with large networks. The address tables are self-learning, so that as nodes are added or removed, or moved from one segment to another, the EDS-305-M12 automatically keeps up with new node locations.
  • Page 8: Auto-Negotiation And Speed Sensing

    100 Mbps. Auto-negotiation takes place when an M12 cable connection is made, and then each time a LINK is enabled. The EDS-305-M12 advertises its capability for using either 10 Mbps or 100 Mbps transmission speeds, with the device at the other end of the cable expected to advertise in the same way.
  • Page 9: Moxa Internet Services

    MTBF > 200,000 hours Regulatory Approvals Safety UL 508 (pending) Hazardous Location UL/cUL Class1, Div.2, ATEX Class1, Zone2 (pending) Maritime DNV, GL (pending) EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 2...

Table of Contents