Engine Cooling System; Radiator Coolant Level Inspection - Polaris ATV 2002 Owner's Manual

MAINTENANCE AND LUBRICATION

Engine Cooling System

Never remove the pressure cap when the engine is warm or hot.
Escaping steam can cause severe burns. The engine must be
cool before removing the pressure cap.

Radiator Coolant Level Inspection

NOTE: This procedure is
only required if the cooling
system has been drained for
maintenance and/or repair.
However, if the recovery bottle
has run dry, the level in the
radiator should be inspected
and coolant added if necessary.
To access the radiator pressure
cap:
Gen III (A) - To access the
pressure cap, clean the area
around the oil cap and remove
the oil cap (2-cycle models).
Remove front cover by placing
your fingers under the front of
the cover and pulling upward.
Reinstall oil cap.
Gen IV (B) - Using the tool
provided, remove the four
screws securing front rack (2).
Remove front cover (3) by
placing your fingers under the
front of the cover and pulling
upward.
102
WARNING
A
B
2
3
1