Polaris ATV 2002 Owner's Manual page 58

Controls
Shifting to Reverse
With the ATV running and in neutral, hold the brake lever and push the
Reverse/Override button on the LH control. Depress the gear shift
pedal one stroke. The reverse indicator light will come on. Slowly
release the brake lever and press throttle control lightly.
Be careful when operating in reverse. Make certain your path
is free of obstacles or and bystanders. Risk of a tip over is
greatly increased on hillS. Avoid backing on hills or inclines
whenever possible. Tipovers could result causing severe injury
or death.
Important Safeguards
S Always back slowly avoiding excessive speed and do not use the
reverse speed override switch system unless additional power is
required for vehicle movement.
S Avoid turning at sharp angles in reverse.
S Avoid backing on steep inclines.
Light Switches and Indicator Lights
This ATV is not equipped with highway approved lighting. This
ATV is designed for off-road use only and must not be ridden on
streets or highways. Use caution and drive at reduced speeds in
conditions of reduced visibility such as fog, rain and darkness.
CONTROLS AND FEATURES
WARNING
WARNING
55