Crossing Streams - Polaris ATV 2002 Owner's Manual

RIDING
Safe Riding Tips

Crossing Streams

Your Polaris ATV can operate through water up to maximum
recommended depths reaching the footrests. Before fording
streams always:
1. Determine water depths and current.
2. Choose a crossing where both banks have gradual inclines.
3. Proceed slowly, avoiding rocks and obstacles if possible.
4. After crossing, dry the brakes by applying light pressure to the
lever until braking action is normal.
S Avoid operating the ATV through deep or fast flowing water. If
you cannot avoid water which exceeds the recommended maxi-
mum depth, go slowly, balance your weight carefully, avoid sud-
den movements, maintain a slow and steady forward motion. Do
not make sudden turns or stops and do not make sudden throttle
changes.
NOTE: After running the vehicle in water, it is critical your machine
is serviced as outlined in the maintenance chart beginning on page 88.
The following areas need special attention: engine oil, transmission
oil, front and rear gearcases, and all grease fittings.
If your vehicle becomes immersed, and it is impossible to take it to a
dealer before starting, follow the steps described on page 154. It is still
important the vehicle be serviced by your dealer at the first
opportunity.
84