Noise Emission Control System - Polaris ATV 2002 Owner's Manual

TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED!
U.S. Federal law prohibits the following acts or the causing thereof:
(1) The removal or rendering inoperative by any person other than for
purposes of maintenance, repair, or replacement of any device or
element of design incorporated into any new vehicle for the purpose of
noise control prior to its sale or delivery to the ultimate purchaser or
while it is in use or
(2) the use of the vehicle after such device or element of design has
been removed or rendered inoperative by any person.
ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE
ACTS LISTED BELOW INCLUDE BUT ARE NOT LIMITED TO
THE FOLLOWING:
1. Removal or alteration or the puncturing of the muffler or any engine
component which conducts removal of engine exhaust gases.
2. Removal or alteration or the puncturing of any part of the engine air
induction system.
3. Replacement of any vehicle parts with parts not in compliance with
federal regulations.
4. Lack of proper maintenance.
Remember, exhaust system components are very hot dur-
ing and after use of ATV. Serious burns can result if hot
components are touched.
S Do not touch exhaust system components. Serious burns can re-
sult.
S Be especially careful when traveling through tall grass. The poten-
tial for fire exists.
USFS Approved Spark Arrestor
Most Polaris ATVs have mufflers that were tested and approved in
accordance with the USFS Forest Service Standard 5100-1A. For
specific information on your model, see the Owner's Manual
Specification Supplement that came with your machine.
NOISE EMISSION CONTROL
SYSTEM REGULATION
CAUTION
75