Polaris ATV 2002 Owner's Manual page 121

MAINTENANCE AND LUBRICATION
Lubrication
Transmission Oil Changing Procedure
1. Remove the four screws on the footwell and gently pull outward
for access. Remove propshaft shield from the right side of the
vehicle (Scrambler 500 4x4, Xplorer 4x4).
2. Remove fill plug.
3. Remove transmission drain plug located on the bottom left hand
side and drain the oil (refer to page 117 for the location of the
Magnum drain plug). Catch and discard used oil properly.
4. Clean and reinstall the drain plug torque to 14 ft. lbs. (1.93 kg-m).
5. Add the correct amount of Polaris Premium Synthetic Gearcase
Lubricant until oil reaches the bottom of the filler hole.
6. Check for leaks.
7. Reinstall propshaft shield or footwell and screws removed in step
1.
118