Lubrication Recommendations - Polaris ATV 2002 Owner's Manual

MAINTENANCE AND LUBRICATION

Lubrication Recommendations

Item
1. Engine Oil
(2-Cycle)
2.Engine OIl
(4-Cycle)
3. Brake
Fluid
4. Transmis-
sion Oil
5. Front
Gearcase Oil
6. Front Prop
Shaft U-joints
7. Front
Propshaft
Yoke
8. Drive
Chain(s)
9. Demand 4
Hubs - All
Wheel Drive
ATVs
94
Lube Rec
Polaris Fill oil tank. See page 49.
Injection
Oil
Polaris Add to proper level on dip-
Premium stick. See page 105.
4 Synthet-
ic 0W40
DOT 3 Maintain level between fill
Only lines. See page 46.
Polaris See Page 117
Premium
Synthetic
gear case
lube
GL5 See Page 122 *Models
80-90 with Visco drive require
Weight special lubricant. See
Gear your owner's manual sup-
Lube plement for requirement.
Grease+ Locate Fittings and
Grease
Grease+ Locate fittings and grease
-- 3 pumps maximum
O-Ring Lubricate as often as re-
chain lube quired. Before each ride
or in wet conditions
SAE
80/90
Premium Remove set screw in
Hub Lube hubs. Rotate wheels to 4
O'clock position. If lubri-
cant is not visible add
more. Reinstall set screw.
Method Frequency*
As needed,
when refuel-
ing
Check level
daily.
As required;
change every
two years or
200 hours
Change
annually or at
100 hours
Change
annually or at
100 hours
Every 3
months or 50
hours
Every 3
months or 50
hours
As required
Annually or
at 100 hrs