Silicon Graphics Rackable C1104G-RP5 User Manual page 6

vi
Provides best practice procedures to work with a node board in the C1104G-RP5 chassis,
install memory DIMMs, PCIe expansion cards and hard disk drives.
• Chapter 6, "Basic Troubleshooting and Chassis Service"
Describes some basic steps required to troubleshoot your system. Additional sections in this
chapter are intended to guide you through basic component remove and replace procedures.
• Appendix A, "BIOS Error Codes,"
Provides a brief listing of BIOS error code information.
• Appendix B, "System Specifications,"
Describes system component environmental specifications and compliance.
007-5839-001