Pointing The Antenna - COBHAM EXPLORER 710 User Manual

Handy portable terminal supporting simultaneous voice and data communication over bgan

Hide thumbs Also See for EXPLORER 710:

Table of Contents

Pointing the antenna

For detailed information on the pointing procedure, see To point the antenna on page 16.

You can use the web interface to help you with the pointing process. To start the pointing

procedure, do as follows:

1. If the pointing process is not automatically started, select

The signal strength is shown on the screen.

2. Turn and tilt the antenna until you have obtained the highest possible signal strength.

3. Click Accept.

The terminal will now try to register on the BGAN network.

98-140012-A

Pointing the antenna

Chapter 4: Using the web interface



and select Start.

Table of Contents

Do you have a question about the EXPLORER 710 and is the answer not in the manual?