Selecting The Source - Planar m70l Installation Manual

Selecting the Source

Selecting the source means choosing the input connector from where the picture is
coming. Selecting the source (picture) manually is usually quicker than using the
SOURCE
You'll choose from the connectors shown in the table below, depending on whether
your display has the optional VIM installed.
Analog
Digital
Analog
input
Digital
input
Connect the power cord and turn on the power switch. If the power was already on,
and the backlights are off, press the
button.
Source Connectors
Without VIM
Analog
Digital
Component
S-Video
Composite
SD/HD SDI
m70L Installation & Configuration Guide
With VIM
Digital
loop-
through
button on the remote.
ON
Selecting the Source
With VIM
25