Turning The Ps4661T/Ps5561T On; Turning The Ps4661T/Ps5561T Off; Adjusting The Volume; Selecting The Input Source - Planar PS4661T User Manual

Turning the PS4661T/PS5561T On

Turning the PS4661T/PS5561T On
1
2
3

Turning the PS4661T/PS5561T Off

With the power on, press the power button on the remote or side control panel to
put the LCD panel in a standby mode. To turn off power completely, turn the AC
switch to "O" or disconnect the AC power cord from the power outlet.
Note:
standby mode.

Adjusting the Volume

1
2

Selecting the Input Source

1
32
Insert the power cord into the display and the power outlet.
Ensure the AC switch is set to "—".
Press the power button on the remote or side control panel.
If there is no signal for a certain period of time, the LCD panel will automatically go into
Using the remote, press the
volume.
Press the button to temporarily turn off all sound. To restore the sound,
MUTE
press the button again.
MUTE
Do one of the following:
• Using the remote, press the desired source button (
).
DISPLAYPORT
• Press the source button on the PS4661T/PS5561T's keypad. Use the arrow
? ?
buttons ( ) to select one of the following input sources and press
, or
HDMI DVI DISPLAYPORT
PS4661T and PS5561T User Guide
- or
VOLUME VOLUME
.
VGA
HDMI
DVI
DisplayPort
+ to increase or decrease the
, , or
VGA HDMI DVI
ENTER
: ,
VGA