Adjusting Input Levels
8
9
10
36
If the color bar pattern has a pluge, you can use it to adjust Brightness. Pluge
stands for Picture Line-Up Generation Equipment. A pluge is used to calibrate the
black level on a video monitor.
Pluge
Although it is not required, we recommend that you save the configuration to a
memory slot. (See "Saving Configurations" on page 74.)
If you have more than one source coming through the same connector, adjust
Input Levels for each source.
m70L Installation & Configuration Guide
Adjust Brightness so you cannot
see the different between these
two marks,
but you can see the difference
between these two marks.