Ascii Response Type; Ascii Response Terminator - Planar m70l Installation Manual

Serial Port Settings and Diagnostics
Part of the RS232 command will be an address. This address may take several forms.
For example, suppose you have eight displays in one area divided into two groups.
You might set the IDs of the displays like this:
Group ID
A
A
A
A
B
B
B
B
With this scheme, you have four ways to address these displays:
Address
A3
B4
etc.
**
*4
B*

ASCII Response Type

Determines what type of data will be returned to the computer. For human-readable
text in a serial program, choose
DATA ONLY

ASCII Response Terminator

Will be determined by what your serial program wants to see at the end of every
transmission from the display.
68
Unit ID
1
2
3
4
1
2
3
4
Affect on Displays
Only the specific display addressed will obey the command.
Also, the display will respond to the host computer.
All displays in this serial loop will obey the command.
Both the displays whose IDs end in "4" will obey this
command.
All four displays in Group B will obey the command.
SYMBOLIC
.
m70L Installation & Configuration Guide
. For computer-read data, use or
NUMERIC