Table of Contents
Advertisement
Turning the Disp lay Off
With the power on, press the power button on the remote or side control panel to
put the LCD panel in a standby mode. To turn off power completely, turn the AC
switch to "O" or disconnect the AC power cord from the power outlet.
Note:
standby mode.
Adjusting the Vo lume
1
2
Note:
Selecting the Inp ut So urce
Do one of the following:
Note:
Navigating Thro ugh the Menus
1
2
3
If there is no signal for a certain period of time, the LCD panel will automatically go into
Using the remote, press the
volume.
Press the
button to temporarily turn off all sound. To restore the sound,
MUTE
press the
button again.
MUTE
The analog audio out is variable. S/PDIF is fixed.
• Using the remote, press the desired source button
HDMI3, HDMI4, OPS, VGA).
• Press the source button on the display's keypad. Use the arrow buttons (
select one of the following input sources and press
HDMI2, HDMI3, HDMI4, OPS, VGA).
When the display cannot find a source, a "No signal" message will appear.
With the power on, press
Within the menu, use
adjust options.
Press
to return to the previous menu. To exit the menu system, press
MENU
EP Series Ultra HD LCD Displays User Guide
- or
VOLUME
VOLUME
. The
menu appears.
MENU
INPUT
and
to navigate through the menus and
,
,
,
ENTER
Turning the Display Off
+ to increase or decrease the
(DP1, DP2, HDMI1, HDMI2,
ENTER: DP1, DP2, HDMI1,
) to
.
EXIT
23
Advertisement
Table of Contents
