Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
INTERNAL VALUE MODE
Press
to enter, and the display shows internal value
TARE
Please check whether the internal value has changed obviously with weight
changing.
Please check the backlight.
Press
ON/ZERO
KEYPAD TEST MODE
Press
to enter, display shows
TARE
Keypad's internal code:
Press
ON/ZERO
FIRMWARE VERSION DISPLAY MODE
Press
to enter , display shows the firmware version
TARE
Press
key again, the display shows maintenance number
TARE
Press
ON/ZERO
BACK TO THE LAST SCREEN
Press
key to exit self-test mode, the scale will restart automatically.
TARE
1-6 Error Messages
⇒
Unable to read the EEPROM
The EEPROM is not mounted yet, or the circuit near EEPROM is broken.
Initial zero is higher than the zero range when switching the scale on.
⇒
(approval models)
Initial zero is lower than the zero range when switching the scale on.
⇒
(approval models)
⇒
Internal value is below Zero.
⇒
A/D IC malfunction (cannot read A/D value). The load cell may not be
connected to the scale correctly.
⇒
The weight of the object is over 9 divisions of the maximum capacity.
⇒
A/D IC value is over the maximum range.
⇒
Weight is lower than -1/6 full scale.
1-7 Weight Unit
(kg)
1 g = 0.001 kg
(g)
1 g = 1 g
(lb)
1 g = 0.002204623 lb
(lb/oz)
1 g = 0.03527396 oz
(oz)
1 g = 0.03527396 oz
02005324
key to back to the last screen , the display shows
key= 07
TARE
key to back to the last screen , the display shows
key to back to the last screen, display shows
(must hook up Load Cell to test)
key= 06
UNITS
NET/GROSS
7
key=05
for 2 secs
ZSME300000276
Advertisement
Table of Contents
