Error Messages (Display In General Function Setting) - Excell Dingo EX2002 User Manual

EXCELL PRECISION CO., LTD
Function
Check weighing setpoint
parameter setting
Key actions in function set up mode
⇒ Increases the number of the flashing digit
⇒ Decreases the number of the flashing digit
⇒ Moves the flashing digit one space to the left
⇒ Moves the flashing digit one space to the right
⇒ Saves the configuration
⇒ Quits set up mode / Escape
2-2 Error Messages
⇒
.
⇒
.
⇒
.
⇒
.
⇒
.
⇒
.
⇒
.
04011010
Operation
Press the key to set
the parameter of FUNC.4 to 1 in
the normal mode
(Display in General Function setting)
Load Cell output voltage < - 0.1m V / V or > 4mV / V
Weight value ≤ previous weight value
Actual measured weight value ≤ previous weight value
Setting value 0
mV / V value entered > measuring range
mV / V value entered is too small (SPAN – Zero < 0 mV / V)
Displayed resolution is less than 0.12 μV / division
Display
.
or
.
8
Description
See 4-2 for details
ZSME400000002