Storing The Parking Position - Mercedes-Benz CLS 2015 Operator's Manual

Mirrors
118
If electrolyte comes into contact with your
R
skin or hair or is swallowed, seek medical
attention immediately.
Immediately change out of clothing which
R
has come into contact with electrolyte.
If an allergic reaction occurs, seek medical
R
attention immediately.
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
glare mode if the following conditions are met
simultaneously:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior light-
ing is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position
Using reverse gear
Button for the driver's side exterior mirror
:
Button for the front-passenger side exte-
;
rior mirror
Adjustment button
=
Memory button M
?
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this posi-
tion.
Stop the vehicle and turn the SmartKey to
X
position 2 in the ignition lock
( page 149).
Y
Press button ; for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the
X
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving posi-
tion.
Using the memory button
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M ?.
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 149).
Y
With the exterior mirror on the front-
X
passenger side activated, use adjustment
button = to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
Press memory button M ? and one of the
X
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
these steps.