Display Message - Mercedes-Benz CLS 2015 Operator's Manual

Table of Contents

Advertisement

Display messages
262
Display messages
¨
Vehicle Rising
Vehicle Rising
Please Wait
Please Wait
¨
Stop Vehicle Vehi‐
Stop Vehicle Vehi‐
cle Too Low
cle Too Low
¨
Malfunction
Malfunction
ë
Off
Off
Possible causes/consequences and M M Solutions
The vehicle level is too low when the vehicle is stationary. A warn-
ing tone also sounds.
Do not pull away.
X
The vehicle level is set when the display message disappears.
You have pulled away while the vehicle level is still too low.
AIRMATIC sets the vehicle to the selected level after a short
period.
Pull over and stop the vehicle safely as soon as possible, paying
X
attention to road and traffic conditions.
Secure the vehicle against rolling away (
X
Wait until the display message disappears before pulling away.
X
AIRMATIC is defective. A warning tone also sounds.
Do not drive at speeds above 50 mph (80 km/h).
X
Make only slight steering movements. Otherwise, the front
X
fender or the tires could be damaged if the steering movement
is too large.
Listen for scraping sounds.
X
Pull over and stop the vehicle safely, paying attention to road
X
and traffic conditions, and set a higher vehicle level.
Depending on the malfunction, it may be possible to raise the
vehicle.
Visit a qualified specialist workshop.
X
The AIRMATIC function is restricted. The vehicle's handling char-
acteristics may be affected.
Do not drive at speeds above 50 mph (80 km/h).
X
Visit a qualified specialist workshop.
X
The HOLD function is deactivated. The vehicle is skidding.
A warning tone also sounds.
Reactivate the HOLD function later (
X
page 170).
Y
page 191).
Y

Advertisement

Table of Contents
loading

Table of Contents